B14 Gas Alarm Single Module
|
 |
INTRODUCTION.
ATI’s Series B14 Gas Alarm Module
Receivers are compact electronic modules that provide local alarm,
display, and signal retransmission functions for gas detection systems.
The
modules are designed to accept input from either two, three, or four
wire 4-20 mA transmitters located up to 10,000 feet from the receiver.
They’re ideally suited for use with ATI’s Series A12 or B12 two-wire
toxic gas transmitters, or Model A12-17 or B12-17 three-wire combustible
gas transmitter.
B14
Alarm Receivers are DIN rail mounted modules that can be supplied in
single or multiple unit enclosures. Gas concentrations are indicated
directly in PPM, PPB, percent, or percent LEL with the display range
selectable by the user.
Each
module provides separate caution, warning, and alarm setpoints with LED
bar indicators of each alarm point. LED indicators flash on initial
alarm condition and change to steady on when the alarm is indicated.
Modules contain individual alarm relays for each alarm setpoint.
However, each relay can be assigned to any setpoint to allow multiple
alarm functions at a single alarm point. Relays are configurable for
either standard or fail-safe operation and for either latching or
non-latching operation. A fourth LED alarm bar and relay are provided
to indicate trouble conditions. The trouble alarm and relay will
activate on loss of input signal or if the 4-20 mA input drops below a
specific value.
Want to learn more about our B14 Gas Alarm Module?
Click the "Product Literature" link above the product image.
|
|
|
|
|
|