Forgot Password?   Create Account


Blog
5 Common Water Monitoring Mistakes to Avoid for Businesses
Monday, September 7, 2020

Every day, 2 million tons of sewage drain into the world's water. As each day goes by, it gets harder to come across clean water. That's why it is important to have quality water monitors and know how to use them.

If you are having trouble with your water monitoring system, you have probably made a common mistake. Read on to find out about 5 common water monitoring mistakes you don't want to make.

1. Calibration Problems

Calibration is the most common water monitoring mistake because it can be tricky for a lot of people. It is an important piece of the system because it collects critical data.

The calibration process has a lot of steps that can be overlooked by someone who is not used to the system. There are different types of monitors that only professionals will know how to handle.

2. Using Expired Standards

Calibration is ket to improving water quality, however, calibration standards have an expiration date that you need to watch out for. The bottles of the standard will have the expiration date labeled.

Typically, the lifespan of a standard is two years. This number can vary depending on the chemical compositions. The lifespan shortens significantly after the bottle is opened.

3. Having Dirty Equipment

Dirty equipment can cause harmful chemicals in water. This is one of the water monitoring mistakes you don't want to make and can be easily avoided.

The equipment you are calibrating needs to be clean to keep any problems from arising. Turbidity especially runs into this issue often. If you are seeing negative values for turbidity, you probably have unclean equipment.

During calibration, turbidity is susceptible to contamination. Any dust, biofouling, or grime can mess up the balance.

4. Taking Shortcuts

There is a long to-do list when it comes to water monitoring tools. You need to be sure everything is calibrated correctly and is clean to use.

It may seem like a lot of work because it is. This does not mean you should look for shortcuts to take because it will only cause you more issues in the long run.

Before performing a calibration, you should rinse the sensor guard, calibration cup, and probes twice. This is a standard procedure for most calibrations that you should follow.

Some procedures may be more thorough depending on the equipment you have, so be sure to read the manual. A manual will be able to tell you exactly what to do during the calibration process and no corners should be cut. Typically, a rinsing policy will be finished when there are no more standards left on the equipment.

5. Not Choosing Right

People commonly struggle to choose the right calibration points and standards. Everything down to the conductivity probes should be chosen correctly for the type of water you are monitoring.

If you calibrate with the right items, you will be more accurate in every range. Not choosing the right calibration points and standards will leave you susceptible to contamination.

Water Monitoring Mistakes Explained

Now that we have explained these water monitoring mistakes, you can be sure not to make them. It's important to have quality water, but that can only be done if you follow the right tips.

For more information about monitoring mistakes and water quality monitors, contact us today.

We are…”The Only Company to Trust, When You Require the Best, in Water and Gas Quality Monitoring.”

View All Recent Posts