Click on any of the parameters to learn more.
ATi’s Q22 PX universal or loop powered sensors emulate standard, non-amplified combination sensors and are designed to interface with all non-ATi pH/ORP analyzers. The universal sensors require no power supply as the preamplifier is powered by an internal lithium battery. The pH sensor outputs a mV signal in the range of either -500 to +500 mV or 0 to 2 VDC; both are linear over the 0 to 14 pH range. The ORP (Oxidation Reduction Potential) sensor outputs an mV signal that ranges from -1000 to +1000 mV.
These sensors may be used as replacement sensors for use with all non-ATi analyzers. The Loop-powered sensors require an external 7-30 VDC power supply and provide a 4-20 mA output signal for direct connection to generic panel meters, data acquisition systems, or other devices that accept a current input. The sensor includes integral temperature compensation of the pH signal, so no temperature output is provided. The sensor output is uncalibrated, therefore, the receiving instrument must be capable of providing user calibration of the pH or ORP signal on a periodic basis.
Our team of experts are on hand to deal with any queries regarding our products or services.Get in touch
Badger Meter continues to invest in its industry-leading smart water offerings. and is pleased to announce the acquisition of Syrinix, Ltd, a privately held provider of intelligent water monitoring solutions.Read
The removal of chlorine before discharge to the environment from clean water and also waste water effluent is common practice…Read
Water quality monitoring has just got smarter with ATi’s latest innovation, the exclusive smart multi-parameter, street-level telemetry bollard.Read