Click on any of the parameters to learn more.
Peracetic acid (PAA) is an extremely strong oxidizer widely used in the food industry for disinfection of piping systems and processing equipment. It is also used for spray washing of food products, and for disinfection of cooling water systems. As a disinfecting agent, PAA is often preferred because it produces no harmful breakdown products. As with any disinfection system, maintaining proper residual values is the key to effective pathogen control. To facilitate reliable chemical feed control, ATI has developed an on-line water quality monitor cable of providing real time measurement of low levels of PAA in solution.
The Q46/85 Peracetic Acid Monitor uses a direct sensing polarographic probe. The probe is typically used in a flowcell, but a submersible sensor is also available. A permeable diffusion membrane isolates the sensing electrodes from the measured sample, providing long-term stability without electrode fouling problems. The measurement is selective for PAA and is not affected by changes in hydrogen peroxide concentration, which is always present in PAA solutions.
The Q46/85 Peracetic Acid Monitor is available for a wide range of applications including:
|Q46-85 Peracetic Acid Measurement System Manual|
|Q46/85 Peracetic Acid Monitor Modbus RTU|
|Q46/85 Peracetic Acid Monitor Modbus TCP|
|Q46/85 Peracetic Acid Monitor Profibus|
Our team of experts are on hand to deal with any queries regarding our products or services.Get in touch
ATi’s distributor in Australia, SAFEgroup Automation (SGA) was engaged by Unitywater to design and install…Read
Accurately controlling a dose of sterilant to clean pipework in the food and drink industry is vital to the taste, quality…Read