B14 Gas Alarm Module Receivers

ATi’s B14 Gas Alarm Module Receivers provide local alarm, display and signal re-transmission functions for gas detection systems.

Monitoring hazardous gases in ambient air

ATI’s Series B14 Gas Alarm Module Receivers are compact electronic modules that provide local alarm, display, and signal retransmission functions for gas detection systems. The modules are designed to accept input from either two, three, or four wire 4-20 mA transmitters located up to 10,000 feet from the receiver. They are ideally suited for use with any of ATi’s series A12, B12, C12, D12, or F12 gas transmitters.  

B14 Alarm Receivers are DIN rail mounted modules that can be supplied in single or multiple unit enclosures. Gas concentrations are indicated directly in PPM, PPB, percent, or percent LEL with the display range selectable by the user. Each module provides separate caution, warning, and alarm setpoints with LED bar indicators of each alarm point. LED indicators flash on initial alarm condition and change to steady on when the alarm is indicated.

Modules contain individual alarm relays for each alarm setpoint. However, each relay can be assigned to any setpoint to allow multiple alarm functions at a single alarm point. Relays are configurable for either standard or fail-safe operation and for either latching or non-latching operation. A fourth LED alarm bar and relay are provided to indicate trouble conditions. The trouble alarm and relay will activate on loss of input signal or if the 4-20 mA input drops below a specific value.

Features & specification

  • Wide range of gases available from sensor list
  • Loop-powered 4–20 mA, 675 ohms maximum at 24 VDC
  • 12–30 VDC
  • Explosion-proof enclosure optional, Class 1, Div., 1, Groups B, C, & D
  • Zero and span potentiometers mounted on transmitter circuit board
  • Operating temperature between -30° to +55°C (except oxygen, which is -10° to +55°C)
  • Sensor Pressure Limits: 7–30 PSIA (0.5–2 Bar)
  • Optional 3-Digit LCD

Key benefits

  • User selectable concentrations in PPM, PPB, percent or percent LEL
  • Modules provide caution, warning and alarm setpoints with LED bar indicators

Downloads





VIEW ALL DOWNLOADS

Contact us

Our team of experts are on hand to deal with any queries regarding our products or services.

Get in touch

A team of experts, ready to help

A global company with a caring culture. We have a team of experts on hand to help with any product or support query you may have. Contact us and experience ATi’s exemplary customer support.

Get in touch

Industries

Catch up on the latest from ATi



News icon
News
Badger Meter Enhances Smart Water Capabilities With Acquisit…

Badger Meter continues to invest in its industry-leading smart water offerings. and is pleased to announce the acquisition of Syrinix, Ltd, a privately held provider of intelligent water monitoring solutions.

Read
News icon
News
Reduce excess chemical overfeed with the Q46S Residual Sulfi…

The removal of chlorine before discharge to the environment from clean water and also waste water effluent is common practice…

Read
News icon
News
Get Street Smart with ATi’s MetriNet street-level telemetr…

Water quality monitoring has just got smarter with ATi’s latest innovation, the exclusive smart multi-parameter, street-level telemetry bollard.

Read