UV absorption and turbidity in a single sensor

UV-254 measurements are a practical indicator of dissolved organic compounds in water. Using a UVA sensor allows for long term, continuous monitoring of organics without the need for chemicals and reagents.

The ATi sensor has the advantage of being nearly real-time, providing input to treatment control systems and alarming of abnormal conditions. Routine maintenance consists of cleaning the optical surfaces, which is generally simple and quick. The Q46UV sensor provides additional optical measurements for added measurement capabilities and increased reliability. Infrared sensors for measuring both 90° Scatter Turbidity and IR absorption are built into the UVA sensor. These additional optics allow for the measurement of both UV-254 and Turbidity, a unique capability to enhances the usefulness of the monitoring package, especially in raw water monitoring applications. The IR absorption measurement is used to correct measurements for minor optical fouling that can occur over weeks or months of operation. Sensors in contact with raw or settled water samples may experience fouling from iron and manganese.

Pre-chlorination causes iron and manganese to precipitate out of solution and coat surfaces that are in contact with the sample. While manual sensor cleaning is easy, ATi offers Q-Clean, an automatic sensor cleaning system that reduces user maintenance. The cleaning system consists of an automatic sensor wash system that injects a cleaning solution into the sensor flow chamber at the frequency programmed by the operator. The cleaning solution contains chemicals that dissolve iron and manganese that has accumulated on optical surfaces.

Traditional methods of monitoring parameters such as TOC, COD, and BOD capture more organics and other potential contaminants but historically had the drawback of being expensive and maintenance intensive. If these additional organic measurements are needed beyond UV254, ATi sister brand s::can, offers a full line of reagentless spectrometers for TOC, DOC, COD, BOD (and more) that can be integrated with ATi products into a complete monitoring package. For more information on organics monitoring: Home – s::can (s-can.at)

Features & specification

• AC or DC Power Option
• Extra Outputs
• Range Flexibility
• Analog Output Options
• PID Output
• Digital Communications for Profibus-DP, Modbus-RTU, Modbus-TCP/IP or Ethernet-IP.
•  Relay Contacts Options
• Flexible Mounting Options
• Large, Back-lit LCD Display
• Sensor Diagnostics

Applications

The Q46/88 Suspended Solids Monitor is available for a wide range of applications including:

• Raw water
• Treated water
• Recycle water
• Wastewater effluents